Home Categories Send inquiry

12mm Wirebrushed Ash Wood Flooring

What is Multilayer Engineered Flooring?

1.Structure: 1.1.The Engineered Flooring first layer is usually with UV coating of natural oil. 1.2.The second layer is the hardwood top layer and it is also called veneer layer and it can be oak, walnut, maple, birch, etc. And the veneer thickness is usually 2mm, 3mm, 4mm, etc. 1.3.The third layer is the plywood core layer and this layer uses different species of veneers forming plywood, such eucalyptus, poplar, birch. 1.4.The fourth layer is the backing layer and it is to provide stability to the board and its species is usually poplar. 2.Specifications
Flooring Type Prefinished Species Maple/Hard Maple
Color Brown Shade Medium/Neutral Shade
Finish Type Urethane Gloss Level Low-Gloss
Application Residential Core Type Multi-Ply
Profile Tongue & Groove Edge Type French Bleed
Maximum Length (in.) 48 Minimum Length (in.) 20
Average length (in.) 33 Width (in.) 5
Thickness (in.) 0.55 Radiant Heat Compatible No
Below Grade Yes Installation Floating, Glue Down, Nail Down, Staple Down
Certification CARB II Wear Layer Thickness (mm) 3
Surface Finish Distressed, Handscraped Finish Warranty (in years) 25 years
Structural Warranty (in years) 25 Years Country of Origin China
Packaging Dimensions (inches) Height: 4.75 Length: 84 Width: 5 Product Dimensions Height: 9/16" Length: 15 3/4 - 47 1/4" Width: 5"
Sqft / Box 17.5 Proposition 65 Attention California Residents

3 Layer Engineered Structure

Multilayer Engineered Structure

Engineered Flooring Advantage

Specifications

Wood Flooring species: Oak, Maple, Birch, Cherry ,Teak, Ash, Rosewood, Walnut, etc.
Origin: Europe, America, China
Dimensions: Length: From 300mm to 2200mm
Width: From 60mm to 600mm
Thickness: From 7mm to 22mm
Structure: Multilayer or 3 Layers
Top layer: 0.2mm/0.6mm/2mm/3mm/4mm/5mm/6mm
Veneer Grade: AB/ABC/ABCD
Moisture content 8% +/-2
Joint system T&G
Core material: Eucalyptus , Poplar ,Birch
Glue: Dynea Phenolic aldehyde resin (CARB P2, E0)
Color: Medium, Light, Natural, Dark
Surface treatments: Smooth/wire-brushed/hand-scraped/distressed/carbonized/smoked
Finish: Treffert UV coating, OSMO natural oil
Installation: Glue, float or nail down
Package: Cartons or Pallet
Certificate: CE,SGS,FSC,PEFC, ISO9001,ISO140001
OEM: Offered

What is engineered wood flooring advantage than hardwood flooring ?

Multi-layer solid wood flooring is a new type of flooring between solid wood flooring and laminate flooring, and is a new trend in floor purchase. Multi-layer solid wood flooring retains all the advantages of natural solid wood flooring. It not only has the natural texture and elasticity of solid wood flooring, but also overcomes the common problems of natural solid wood flooring that is easy to swell and shrink. It has the characteristics of anti-deformation, corrosion resistance and easy cleaning. Secondly, choose whether the size of the product is consistent with the length, width, and thickness of the size you purchased, and then check whether the dimensional tolerance of the product is consistent with the purchased grade. The measurement method can take multiple pieces of floor in the same packing box and assemble it by yourself. After assembling, observe whether the tenon and groove are tightly combined. At the same time, you can touch the floor after splicing to see if it is irregular. If there is a prominent hand feeling phenomenon , Indicating that the product is unqualified. After touching it by hand, pick up two assembled multi-layer solid wood floors and shake them in your hands to see if they are loose. Finally, select the intrinsic quality, which is a key indicator of multilayer solid wood flooring. It can be seen from the water absorption thickness expansion rate that its waterproof and moisture-proof performance, the lower the better, the best is less than 2%, followed by less than 5%. Pyrotechnics are burned on the surface. If there are no traces, the fireproof coefficient is higher. The formaldehyde content is an index that cannot be ignored. According to national regulations, the formaldehyde content per 100g floor shall not exceed 9mg. "Three-point floor and seven-point installation", so it is recommended to choose DEGE brand flooring when choosing multilayer solid wood flooring

Design Type

Click Type

Finish Type

Veneer Grade

How to Distinguish Engineered Flooring Veneer Grade

1. Distinguish Method Grade A: knots are not allowed; Grade B:Quantity of knots per pc: 1-3pcs and the diameter of knots whose color are black is within 8mm and diameter of knots whose color are nearly same as veneer is within 10mm; Grade C: Quantity of knots per pc: 1-3pcs and the diameter of knots whose color are black is within 20mm and diameter of knots whose color are nearly same as veneer is within 25mm; In addition, 20% of white edge of plank width is allowed and medium color variation is allowed; Grade D: Quantity of knots per pc: 1-3pcs and the diameter of knots whose color are black is within 30mm and diameter of knots whose color are nearly same as veneer is unlimited; In addition, length of crack is within 30cm and severe color variation is allowed; 2.Percentage ABC Grade: Percentage of grade AB: 15%, Percentage of grade C: 85%; ABCD Grade: Percentage of grade AB: 20%, Percentage of grade C: 50%, Percentage of grade D: 30% 3.Picture

Certificate

Product Process

Our Market

Applications

Project 1

Project 2


12mm Wirebrushed Ash Wood Flooring Related Video: